Main specification:
1.  Model: UF-06A-I/ UF-06A-II/ UF-AB-III
2.  Maximum input power: UF-06A-I: 6.6KW; UF-06A-II: 6.6KW; UF-06AB-III: 6.6KW
3.  Oscillatging frequency: UF-06A-I: 100-500KHz; UF-06A-II: 200-700KHz; UF-06AB-III: 0.4 -1.1MHz
4.  Input voltage: 220V, single phase, 50Hz or 60Hz
5.  Maximum input current: 30A
6.  Duty cycle: 100%
7.  Cooling water desire: 3L/min 0.2Mpa
8.  Water temperature protection point: <45 C
9.  Auto heating time, retaining time: 0.1-99.9Sec.
10.  Weight and size:
Model  N. W. / G. W. (kg)  Size (L xW xH)  packing size
UF-06A-I  22kg/27kg  580x260x500mm  680x360x600mm
UF-06A-II  22kg/27kg  580x260x500mm  680x360x600mm
UF-06A-III controller  18kg/23kg  520x240x500mm  620x340x600mm
UF-06A-III transformer  2kg/7kg  140x140x96mm  240x240x106mm


Features:
1.  With high frequency up to 500KHz-1.1MHz, the quenching thickness can be controlled lower than 1mm, and very thin and tiny parts can be easily heated.
2.  IGBT and inverting technologies of third generation been used; Higher reliability and lower maintenace cost.
3.  100% duty cycle, continuous working is allowed at maximum power output.
4.  Constant current or constant power status can be selected accordingly to achieve higher heating efficiency;
5.  Display of heating power and heating current and oscillating frequency.
6.  Simple to install, installation can be done by unprofessional person very easily;
7.  Light weight, 24KG only;
8.  Advantages of the model with timer: The power and the operating time of the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability.

Applications:
Brazing of the tools
Quenching of the saw tip
Shaping of the small driller
Brazing of the saw tip
etc.